Antoun, Pioneering Airport Slab Replacements

How Belitic Calcium Sulfoaluminate Cement (BCSA) and real-time temperature monitoring, the Maturity Method, are transforming the way we perform slab replacements in airports and roads.

By Ian Hampton, Technical Director, Antoun and Aziz Hasan Mahmood, UTS

Major Airports never sleep and neither do the teams of Engineers, experts and crews performing critical concrete slab replacements and infrastructure maintenance on Taxiways and Runways.

A key component of this infrastructure maintenance is the replacement of concrete slabs that have reached their design life or have begun failing under airport operations and movements. One of the major challenges facing major airports is the limited time to perform these slab replacements, generally, in under 6 hours and during night and early morning hours.

Recently, technical details of a slab replacement project at Melbourne Airport, published in the International Journal of Pavement Engineering – “On-site strain and temperature monitoring of belitic calcium sulfoaluminate cement concrete airport slabs: feasibility of maturity method”, (Aziz Hasan Mahmood, Ian Hampton, Eric Besher, Louisa Pang & Arnaud Castel), caught the attention of Researchers and Engineers around the world.

The paper details the use of a maturity correlation for Antoun’s Belitic Calcium Sulfoaluminate cement concrete (BCSA), or simply, CTS Rapid Set Concrete, to successfully predict in-place concrete strength. As a result, this helps determine safe saw-cutting windows. Strengths predicted by the maturity method mirrored concrete test data from flexural strength beams and compressive strength cylinders. Strain gauges embedded in the slab provided real-time early-age shrinkage behaviour of CTS Rapid Set Cement Concrete, temperature loggers provided temperature profiles from cement chemical reactions, and the surrounding environment.

The Maturity Method (ASTM C1074, TfNSW T382)

To ensure the right strength was achieved before cutting contraction joints and opening the pavement to airport operations (live traffic), the project team turned to an innovative approach: the Maturity Method.

By embedding sensors directly into the slabs, the team continuously monitored temperature along with strain development. Using standards like ASTM C1074 and TfNSW T382, they linked this temperature data to concrete strength over time. The result? Accurate, on-site predictions of flexural strength—within ±10% of traditional lab-tested results.

This real-time feedback allowed for data-driven decisions during the critical first hours after placement, reducing guesswork and the risk of premature cracking.

This method goes a long way in proving why CTS Rapid Set concrete is a viable solution for airport infrastructure maintenance.

A Smarter Shape for a Longer Life

The study also revealed something remarkable: BCSA concrete doesn’t shrink in the same way as Ordinary Portland Cement (OPC). Sensors showed less overall shrinkage—well below Australian code limits—and a surprising behaviour in slab geometry.

Instead of curling upwards at the edges (a common failure point in airport slabs), the BCSA slabs swelled slightly in a convex shape. This “reverse curl” offers a mechanical advantage under aircraft wheel loads, improving long-term performance and reducing edge failures.

Turning Data into Better Outcomes

The lessons from Melbourne Airport go beyond concrete chemistry. They reflect a shift toward smarter, sensor-integrated construction, where data helps teams work faster and build better.

Critical joints were cut at the ideal time, avoiding surface damage.

Sensors captured the full thermal profile, flagging potential for thermal cracking.

Flexural strength predictions enabled safe reopening, even under real-world time constraints.

This kind of monitoring, once considered experimental, is now proving practical—and essential—for fast-paced, high-stakes projects.

Why Faster Isn’t Always Riskier

Traditional concrete—based on OPC—can take days to reach the structural strength needed to reopen taxiways. Speeding up this process with accelerants often leads to durability trade-offs: reduced workability, greater shrinkage, and higher risks of cracking.

Enter BCSA cement. It’s a fast-setting, low-carbon alternative that meets strength targets in hours—not days. In the Melbourne Airport trial, slabs achieved over 3.1 MPa of flexural strength within 3 hours—enabling a same-night return to service. Even better, BCSA cement offers a 30% smaller carbon footprint than OPC, thanks to lower kiln temperatures during manufacturing.

BCSA in Action: A Growing Global Footprint

While Melbourne Airport leads the charge in Australia, BCSA cement isn’t new. Major airports in the U.S.—including Seattle-Tacoma—have used it for decades. Global projects from Amsterdam to the South Pacific are increasingly relying on BCSA for rapid, resilient slab replacement.

In Australia, airports in Sydney, Brisbane, and Avalon are already following suit. With growing pressure to cut carbon and increase efficiency, demand for solutions like BCSA—and integrated monitoring—is only set to rise.

The Future of Concrete is Fast, Smart, and Sustainable

Melbourne’s success proves that rapid repairs don’t have to compromise quality. With the right mix design and monitoring tools, concrete can meet modern infrastructure demands: speed, strength, sustainability, and intelligence.

If you’re planning time-critical slab repairs or looking to reduce your project’s carbon footprint, BCSA cement concrete—combined with maturity-based monitoring—is ready for take-off.

To read the full academic article please follow this link: https://doi.org/10.1080/10298436.2025.2518153

Talk to our team about using CTS Rapid Set Concrete and our Volumetric Mixers which are mobile batch plants, for your next project.

Discover how real-time monitoring can cut delays and boost confidence in your construction process.

https://antoun.com.au/contact/